Beckson Water Pumps

Water and Irrigation Pumps

When repair of irrigation equipment requires water to be removed in order to access a valve or fitting, the absolute, best solution when electrical means are not available or not practical, is a BECKSON® WATER PUMP.

These lightweight pumps, constructed of high impact, non-sparking PVC need no priming, are a breeze to operate and are easily stored. Our most popular model is the 136PF-6.

These pumps come in 1-1/2" and 1-3/4" diameter with hose lengths from 24" to 72"

1-1/2" Diameter Pumps

Stock Number	Barrel Length	Hose Length	Volume /Stroke
224PF	24"	24"	18 ozs.
230PF	30"	30"	22 ozs.

1-3/4" Diameter Pumps

Stock Number	Barrel Length	Hose Length	Volume /Stroke
124PF	24"	24"	22 ozs.
124PF-6	24"	72"	22 ozs.
136PF	36"	36"	35 ozs.
136PF-6	36"	72"	35 ozs.
160PF-6	60"	72"	35 ozs.
172PF-6	72"	72"	35 ozs.

High Volume

Stock Number: 915F

Pumps a quantity of water easily (over 16 gal. per minute). Flexible tubing in intake end extends to bottom of liquid to be removed. Flexible tubing in outlet end allows for directing of flow. 7 ft. on inlet end, 3 ft. on outlet end.

Diameter = 3"
Length = 24"
Stroke = 14"
Hose ID = 2"

Sprinkler Rotor Pump

Model: RP0936

Easily remove water from sprinkler
rotors. The 9” pump comes with a 12”
rigid, stress crack
resistant polyethylene tube that can be
cut to length. The 36” vinyl discharge
tube directs water away from the head

Accessories


STONE STRAINER Model: STR-1.75 This alternative to the standard foot valve prevents larger stones and debris from entering the pump, prolonging the effective life of the pump. It is available for all 124PF and 136PF series pumps.	MUD STRAINER Model: STR-2.00 For removal of standing water/puddles from athletic areas such as baseball infields. The strainer easily fits our 124 and 136 series of hand pumps. Comes complete with thumb screw for securing to bottom of pump.	INTAKE EXT HOSES Model: FPH-1-1/4-4 (4 ft) Model: FPH-1-1/4-6 (6 ft) Designed to extend the reach of the 124PF and 136PF series pumps. The 1-1/4” diameter reinforced extension hose attaches to the bottom of the pump after removal of the standard foot. It comes with a strainer to reduce clogging.

Syringe Utility Pumps

Model: Syringe Pump

Easily remove standing water from hard to drain areas.
Just pull up on handle to bring liquid into pump.
Push down on handle to discharge liquid where you want
it! It’s that easy!
Barrel Diameter: 1-1/2”
Barrel Length: 12”
Volume: 8 oz./stroke

Pontoon Pumps

For pumping out airplane pontoons (floats)
For use with EDO or Wipaire Floats
Three convenient sizes

Stock Number	Barrel Length	Diameter	Volume /Stroke
F15PX	15"	1-3/4"	14 oz.
F24PX	24"	1-3/4"	22 oz.
F36PX	36"	1-3/4"	35 oz.

To add a float jacket, which prevents the pump from sinking if inadvertently dropped into the water, add FJ to the stock number: (ie. F15PX-FJ)

Plumbing Utility Pump

Stock Number: 12A

For use in draining traps, drain pipes, or other curved piping. Also for pumping from tanks or semi-closed places. Three feet of flexible tube fits in the bottom of pump and extends down into trap or drain. Outlet tube for directing flow into pail or bucket.

Diameter: 1-1/2"
Length: 12"
Volume: 8 oz./stroke